The Ondelle is built around rings that rotate a full 360 degrees on their mounts, which turns installation into an act of composition rather than a fixed outcome. The same fixture can be set flat and linear over a long dining table, or twisted into a staggered wave that catches light differently from each seat. That adjustment happens after the fixture is hung, so the silhouette can be tuned to the room instead of the room working around the fixture.

Light comes from an integrated 36W LED strip running inside the rings rather than exposed bulbs, which removes the glare source from sightlines across a table and means no lamp replacement over the life of the fixture. Three step dimming cycles between 3000K, 4500K and 6000K from the existing wall switch, so the same light can sit at warm white through dinner and shift to a neutral 6000K for work at the same table. Output is rated for rooms of 107 to 161 square feet.

Construction pairs a polished hardware frame with silicone sleeved rings, a combination that keeps the fixture light at 5.73 pounds while allowing the smooth continuous curve the design depends on. At 47 inches long and 9 inches tall with a 47 inch adjustable hanging wire, it is proportioned for a standard six to eight seat table, and the drop can be shortened at install for lower ceilings or bar counters without cutting anything.

Specifications

• Type: linear suspension chandelier, integrated LED
• Size: 47 in long x 9 in high
• Hanging wire: 47 in, adjustable
• Weight: 5.73 lb
• Power: 36W
• Voltage: 110V
• Colour temperature: three step dimming, 3000K, 4500K and 6000K
• Finish options: black, white
• Materials: hardware frame, silicone
• Rotation: 360 degrees per ring
• Coverage: 107 to 161 sq ft
• Use: dining room, kitchen, bar counter
• Care: cut power, wipe with a dry cloth